The VH7-60S110-RC-2415300 is a 7-inch vertical electric slewing drive for single-axis solar tracking. It delivers 6300 N·m output torque, 45 kN·m holding torque, IP65/C3 outdoor protection and ±60° hard limits for utility-scale and commercial PV trackers.
Accionamiento de giro
VH7 7-Inch Slewing Drive for Solar Tracker | 24VDC Vertical Worm Gear Drive
VH7 7-inch vertical slewing drive for solar trackers. 24VDC IP65, 6300 N·m torque, 45 kN·m holding, 60:1 ratio, ±60° hard limit, ≤0.2° precision for single-axis PV tracking systems.
Manufactured and supplied by Elerover — Accionamiento de giro manufacturer and OEM partner for industrial, medical, furniture and solar motion systems.
Parámetros clave
- Operating Temperature
- -30°C ~ +70°C
- IP Class
- IP65
- Connector
- Weipu SP21 / SP2113/P3
- Drive Type
- 7-inch vertical slewing drive for solar tracker
- Gear Ratio
- 60:1
- Hard Limit
- ±60°
- Product Model
- VH7-60S110-RC-2415300
- Motor Voltage
- 24 VDC
Descripción general del producto
Características clave
- 7-inch vertical slewing drive for solar trackers
- Rated output torque 6300 N·m / holding torque 45 kN·m
- Hard travel limit ±60°
- Gear ratio 60:1 with precision ≤ 0.2°
- 24VDC IP65 motor with Weipu SP21 connector
- C3 corrosion protection for outdoor solar sites
Especificaciones técnicas
| Product Model | VH7-60S110-RC-2415300 |
|---|---|
| Drive Type | 7-inch vertical slewing drive for solar tracker |
| Rated Output Speed | 0.025 rpm |
| Rated Output Torque | 6300 N·m |
| Tilting Moment | 10 kN·m |
| Holding Torque | 45 kN·m |
| Static Axial Rating | 100 kN |
| Static Radial Rating | 65 kN |
| Dynamic Axial Rating | 60 kN |
| Dynamic Radial Rating | 45 kN |
| Gear Ratio | 60:1 |
| Hard Limit | ±60° |
| Precision | ≤ 0.2° |
| IP Class | IP65 |
| Corrosion Protection | C3 |
| Operating Temperature | -30°C ~ +70°C |
| Motor Voltage | 24 VDC |
| Motor Output Torque | 300 N·m |
| Motor Rated Current | ≤ 6.5 A |
| Connector | Weipu SP21 / SP2113/P3 |
Aplicaciones
- Horizontal single-axis solar trackers
- Utility-scale PV plants
- Commercial and industrial solar farms
- Desert and outdoor tracking systems
- OEM solar tracker platforms
Detalles adicionales
7-Inch Vertical Slewing Drive for Solar Trackers
VH7-60S110-RC-2415300 7-Inch Slewing Drive
A vertical 7-inch electric slewing drive engineered for single-axis solar tracking.
The VH7-60S110-RC-2415300 combines a worm-gear slewing stage with a 24VDC IP65 motor,
hard travel limits and outdoor C3/IP65 protection for utility-scale and commercial PV trackers.
Rated Output Speed
0.025 rpm
0.025 rpm
Output Torque
6300 N·m
6300 N·m
Holding Torque
45 kN·m
45 kN·m
Tilting Moment
10 kN·m
10 kN·m
Gear Ratio
60:1
60:1
Output Torque
6300 N·m
6300 N·m
Holding Torque
45 kN·m
45 kN·m
Hard Limit
±60°
±60°
Protection
IP65 · C3
IP65 · C3
Product Drawing
VH7 Dimensions & Performance Drawing
Official dimensional drawing for model VH7-60S110-RC-2415300 Rev.A — mounting interfaces, motor data, hard limits and wiring.
Product Overview
Vertical Slewing Drive for Single-Axis Solar Tracking
VH7 is built for horizontal single-axis trackers that need reliable low-speed rotation, outdoor sealing and a clear mechanical travel limit.
This 7-inch vertical slewing drive delivers 6300 N·m rated output torque, 45 kN·m holding torque and 10 kN·m tilting moment,
with a 60:1 worm-gear ratio, ±60° hard limit and ≤0.2° precision.
A 24VDC IP65 motor and Weipu SP21 air-plug cable simplify field wiring for solar EPC and OEM tracker builders.
Slotted base feet, 16×M16 side mounting and a square output interface support repeatable installation on torque-tube tracker structures.
Product Highlights
- 7-inch vertical slewing drive for solar trackers.
- Rated output torque 6300 N·m / holding torque 45 kN·m.
- Hard travel limit ±60° for tracker safety.
- Gear ratio 60:1 with precision ≤ 0.2°.
- 24VDC IP65 motor, C3 corrosion protection.
- Weipu SP21 connector with 1 m cable.
Key Features
Built for Utility-Scale Solar Tracking Outdoors
Designed for desert and field PV projects that need durable single-axis rotation with outdoor-ready sealing.
01
Solar Tracker Geometry
Vertical VH layout with square output interface for torque-tube single-axis trackers.
02
High Holding Capacity
45 kN·m holding torque helps the array resist wind loads when parked or tracking slowly.
03
Hard Limit ±60°
Mechanical travel limits support safer tracker motion envelopes during commissioning and operation.
04
Outdoor Protection
IP65 sealing with C3 corrosion protection for humid, dusty and coastal solar sites.
05
24VDC Field Wiring
IP65 motor with Weipu SP21 air plug and 1 m cable for faster site connection.
06
OEM Mounting Feet
Slotted base feet and 16×M16 side holes support repeatable pier and frame design.
Technical Data
Slewing Drive Performance Parameters
Performance values from drawing VH7-60S110-RC-2415300 Rev.A for product selection and early engineering review.
| Parameter | Value |
|---|---|
| Rated Output Speed | 0.025 rpm |
| Rated Output Torque | 6300 N·m |
| Tilting Moment | 10 kN·m |
| Holding Torque | 45 kN·m |
| Static Axial Rating | 100 kN |
| Static Radial Rating | 65 kN |
| Dynamic Axial Rating | 60 kN |
| Dynamic Radial Rating | 45 kN |
| Gear Ratio | 60:1 |
| Hard Limit | ±60° |
| Precision | ≤ 0.2° |
| IP Class | IP65 |
| Corrosion Protection | C3 |
| Operating Temperature | -30°C ~ +70°C |
Note: Values are for product selection reference from drawing VH7-60S110-RC-2415300 Rev.A. Confirm final configuration for your tracker load case.
Motor & Wiring
24VDC Motor Performance & Connector
VH7 uses a 24VDC IP65 motor with a Weipu SP21 air-plug cable for outdoor solar installations.
| Item | Value |
|---|---|
| Motor Voltage | 24 VDC |
| Motor Output Torque | 300 N·m |
| Motor Output Speed | 1.5 rpm |
| Rated Current | ≤ 6.5 A |
| Motor IP Class | IP65 |
| Connector | Weipu SP21 / SP2113/P3 |
| Cable Length | Approx. 1 m |
| Wire / Pin | Color | Function |
|---|---|---|
| 1 | Black | Motor − |
| 2 | Red | Motor + |
| E | Green | GND |
Mounting Snapshot
Key Installation Dimensions
Selected envelope dimensions from the VH7 drawing for early tracker structural layout.
| Item | Value |
|---|---|
| Product Model | VH7-60S110-RC-2415300 |
| Drive Type | 7-inch vertical slewing drive for solar tracker |
| Overall Width (approx.) | 637 mm (incl. motor housing) |
| Base / Height Reference | 308 mm footprint class / center height ≈ 190 mm |
| Side Mounting | 16×M16 on 110×110 mm pattern (both sides) |
| Base Feet | Slotted holes approx. 20.5 × 36.5 mm |
| Motor Interface | 24VDC IP65 with Weipu SP21 air plug |
Applications
Typical Application Areas
Ideal for single-axis solar tracking where outdoor sealing, holding torque and hard limits matter.
Selection Support
How to Confirm the Right Slewing Drive
1
Confirm Tracker Loads
Share panel area, wind region, axial / radial loads and required holding torque.
2
Confirm Motion Envelope
Provide tracking angle, hard-limit needs, duty cycle and target tracking accuracy.
3
Confirm Electrical Interface
Confirm 24V supply, current capacity, connector preference and controller type.
FAQ
Is VH7 the same as SVH7?
No. VH7 is a vertical single-axis slewing drive for solar trackers. SVH7 is a dual-axis drive for azimuth and elevation control. Choose based on your tracker architecture.
Can VH7 be used on utility-scale solar trackers?
Yes. 6300 N·m output torque, 45 kN·m holding torque, IP65/C3 protection and ±60° hard limits suit many horizontal single-axis PV tracker designs — confirm wind load and row length first.
What motor voltage does VH7 use?
The standard package uses a 24VDC IP65 motor with Weipu SP21 connector and approximately 1 m cable.
What does the ±60° hard limit mean?
It is a mechanical travel limit that helps keep the tracker within a defined angular range during operation and commissioning.
Can mounting and connectors be customized?
Yes. Base feet, side mounting, cable length and connector options can be reviewed for OEM tracker programs.
Need a Solar Tracker Slewing Drive?
Send tracker type, row load, voltage and mounting drawings. Elerover engineering will help size VH7 or a related slewing configuration.
Productos similares
VH9 9-Inch Slewing Drive for Solar Tracker | 24VDC Vertical Worm Gear Drive
VH9 9-inch vertical slewing drive for solar trackers. 6405 N·m torque, 56 kN·m holding, 61:1, ±60° hard limit. Standard 24VDC IP65 motor; 36V / 48V / AC options for single-axis PV systems.
Ver detalles →
SVH9 9-Inch Dual Axis Slewing Drive | 24VDC Solar Tracker Worm Gear Rotary Actuator
SVH9 9-inch dual-axis slewing drive with 24VDC IP65 motors. 7320 N·m output torque, elevation holding up to 56 kN·m, 61:1 ratios, ≤0.17° precision for large solar trackers and rotary platforms.
Ver detalles →
SC7 7-Inch Slewing Drive | 24VDC Worm Gear Rotary Actuator for Solar Tracker
SC7 7-inch slewing drive with 24VDC IP65 motor. 937 N·m output torque, 10400 N·m holding torque, 13500 N·m tilting moment, 71:1 ratio, ≤0.17° precision for solar trackers and rotary platforms.
Ver detalles →
SVH7 7-Inch Dual Axis Slewing Drive | 24VDC Solar Tracker Worm Gear Rotary Actuator
SVH7 7-inch dual-axis slewing drive with 24VDC IP65 motors. Elevation torque 2100 N·m, holding up to 42 kN·m, ratios 71:1 / 60:1, ≤0.17° precision for solar trackers and rotary platforms.
Ver detalles →
SC3 Accionamiento de giro con motor 24VDC | Actuador rotativo compacto de tornillo sin fin
Accionamiento de giro SC3 con motor 24VDC. El accionamiento de giro SC3 es un actuador rotativo compacto de tornillo sin fin integrado con motorreductor planetario 24VDC. Está dise...
Ver detalles →
SC14 14-Inch Slewing Drive | 24VDC Worm Gear Rotary Actuator for Solar Tracker
SC14 14-inch slewing drive with 24VDC IP65 motor. 10.2 kN·m output torque, 48 kN·m holding torque, 67.8 kN·m tilting moment, 85:1 ratio, ≤0.17° precision for large solar trackers and rotary platforms.
Ver detalles →