Request Datasheet
제품 개요
SLA08 10000N linear actuator from Elerover. This DC linear actuator is built for OEM equipment that needs repeatable push/pull motion under industrial duty.
- 최대 하중
- 8000 N / 800 kg
- 스트로크
- 50–1000 mm (customizable)
- 속도
- 5 mm/s (800KG) -80 mm/s (50KG)
- 전압
- 12 V / 24 V / 36 V / 48 V DC
- IP 등급
- IP54 / IP65
적용 분야
- Lifting platforms
- Construction machinery
- Heavy industry equipment
- Solar tracking
주요 이점
- Heavy-duty SLA08 industrial electric linear actuator
- Up to 8000N (800 kg) push/pull force
- 12V / 24V / 36V / 48V DC voltage options
- IP54 / IP65 protection options
- Built-in limit switches; optional Hall feedback
- Retracted install length L = stroke + 250mm
기술 사양
| 최대 하중 | 8000 N / 800 kg |
|---|---|
| 스트로크 | 50–1000 mm (customizable) |
| 속도 | 5 mm/s (800KG) -80 mm/s (50KG) |
| 전압 | 12 V / 24 V / 36 V / 48 V DC |
| IP 등급 | IP54 / IP65 |
| Retracted length | L = S + 250 mm |
| 확장 길이 | 2*S (stroke) + 250 mm |
| Limit switch | Built-in |
| Operating temperature | -26℃~65℃ |
| Certifications | CE |
기술 문서 요청
Request an OEM quote
Share force, stroke, voltage and quantity. Elerover will map your RFQ to a published series or OEM configuration.
Quote context
관련 제품
12V 24V SLA08 8000N linear actuator 100mm stroke for construction machinery
SLA08 100mm stroke (retracted install length about 350 mm) suits construction machinery attachments that need roughly 100mm of controlled push/pull at up to 8000N. 12V/24V DC, IP65 housing, Φ13mm clevis ends, optional Hall for synchronized control.
상세 보기 →
SLA07 8000N 리니어 액추에이터
입력: 12VDC/24VDC. 최대 하중: 8000N. 최대 전류: 2.5A(24V)/5A(12V). 모터 출력: 60W. 최대 속도: 36mm/s. 행정: 50-800mm(맞...
상세 보기 → 12V 24V SLA08 8000N linear actuator 150mm stroke for industrial mover
SLA08 150mm stroke (retracted install length about 400 mm) targets industrial movers and transfer fixtures that need mid-short travel with high holding force. Same 8000N platform: 12V/24V, IP65, parallel motor layout, electronic limit switches.
상세 보기 → 12V 24V SLA08 8000N linear actuator 200mm stroke for heavy duty hatch
SLA08 200mm stroke (retracted install length about 450 mm) is sized for heavy-duty hatches and covers where geometry needs ~200mm of travel under high thrust. Clevis mounts simplify pin-joint hatch linkages; IP65 protects against washdown and outdoor spray.
상세 보기 →
