Request Datasheet
리니어 액추에이터
모델 SLA08
12 V DC 24 V DC SLA08 8,000 N linear actuator 350mm stroke for gate automation
12V 24V SLA08 8000N linear actuator 350mm stroke for gate automation from Elerover.
핵심 사양
- 최대 하중
- 8000 N / 800 kg / 1798 lbs
- 스트로크
- 350 mm
- 속도
- 5 mm/s – 50 mm/s
- 전압
- 12 V / 24 V DC
제품 개요
12V 24V SLA08 8000N linear actuator 350mm stroke for gate automation from Elerover. This DC linear actuator is built for OEM equipment that needs repeatable push/pull motion under industrial duty.
- 최대 하중
- 8000 N / 800 kg / 1798 lbs
- 스트로크
- 350 mm
- 속도
- 5 mm/s – 50 mm/s
- 전압
- 12 V / 24 V DC
- IP 등급
- IP65
- 피드백
- Optional
적용 분야
- Gate automation
- Lifting platforms
- Construction machinery
- Agricultural equipment
- Solar tracking systems
- Material handling
주요 이점
- Heavy-duty industrial electric linear actuator for high-load OEM motion
- Working voltage: 12V / 24V DC (36V / 48V optional)
- Max thrust / pull up to 8000N (approx. 1800 lbs / 800 kg)
- Stroke options from 50mm to 700mm (custom strokes available)
- Compact installation footprint with parallel motor layout
- Outer tube Φ63mm; motor housing Φ64mm
- Front and rear clevis mounts with Φ13mm mounting holes
- Built-in electronic limit switches (clutch protection optional)
기술 사양
| 최대 하중 | 8000 N / 800 kg / 1798 lbs |
|---|---|
| 스트로크 | 350 mm |
| 속도 | 5 mm/s – 50 mm/s |
| 전압 | 12 V / 24 V DC |
| IP 등급 | IP65 |
| Retracted length | 600 mm |
| 피드백 | Optional |
| Limit switch | Yes |
| Mounting type | Φ13mm clevis (front & rear) |
| 모터 유형 | Brushed DC |
| Housing material | Φ63mm |
Performance matrix
| No-load speed | Full-load speed | Thrust | Self-locking force |
|---|---|---|---|
| 5 mm/s | 3.5 mm/s | 8000 N / 800 kg / 1800 lbs | 8500 N / 850 kg / 1900 lbs |
| 8 mm/s | 6 mm/s | 7000 N / 700 kg / 1600 lbs | 7500 N / 750 kg / 1700 lbs |
| 10 mm/s | 7 mm/s | 6000 N / 600 kg / 1300 lbs | 6500 N / 650 kg / 1500 lbs |
| 12 mm/s | 9 mm/s | 5000 N / 500 kg / 1100 lbs | 5500 N / 550 kg / 1200 lbs |
| 16 mm/s | 12 mm/s | 4000 N / 400 kg / 880 lbs | 4500 N / 450 kg / 1000 lbs |
| 20 mm/s | 15 mm/s | 3000 N / 300 kg / 670 lbs | 3500 N / 350 kg / 790 lbs |
| 28 mm/s | 20 mm/s | 2000 N / 200 kg / 450 lbs | 2500 N / 250 kg / 560 lbs |
| 50 mm/s | 38 mm/s | 1000 N / 100 kg / 200 lbs | 1500 N / 150 kg / 340 lbs |
기술 문서 요청
Request an OEM quote
Share force, stroke, voltage and quantity. Elerover will map your RFQ to a published series or OEM configuration.
Quote context
관련 제품
12V 24V SLA08 8000N linear actuator 100mm stroke for construction machinery
SLA08 100mm stroke (retracted install length about 350 mm) suits construction machinery attachments that need roughly 100mm of controlled push/pull at up to 8000N. 12V/24V DC, IP65 housing, Φ13mm clevis ends, optional Hall for synchronized control.
상세 보기 → 12V 24V SLA08 8000N linear actuator 150mm stroke for industrial mover
SLA08 150mm stroke (retracted install length about 400 mm) targets industrial movers and transfer fixtures that need mid-short travel with high holding force. Same 8000N platform: 12V/24V, IP65, parallel motor layout, electronic limit switches.
상세 보기 → 12V 24V SLA08 8000N linear actuator 200mm stroke for heavy duty hatch
SLA08 200mm stroke (retracted install length about 450 mm) is sized for heavy-duty hatches and covers where geometry needs ~200mm of travel under high thrust. Clevis mounts simplify pin-joint hatch linkages; IP65 protects against washdown and outdoor spray.
상세 보기 → 12V 24V SLA08 8000N linear actuator 250mm stroke for agricultural equipment
12V/24V heavy-duty electric linear actuator with 250mm stroke and up to 8000N (1798 lbs) thrust. Optimized for agricultural equipment and industrial OEM motion systems. IP65, clevis mounts, optional Hall feedback.
상세 보기 →
