Request Datasheet
Actuador lineal
SLA08B 7,000 N actuador lineal
SLA08B 7000N linear actuator from Elerover.
Especificaciones clave
- Carga máxima
- 7000 N
- Carrera
- 50 / 100 / 150 / 200 / 250 / 300 / 350 / 400 / 450 / 500 / 550 / 600 mm (optional and customizable) Loa
- Velocidad
- 5.5 mm/s – 35.0 mm/s
- Tensión
- 12 V / 24 V / 36 V / 48 V DC
Descripción del producto
SLA08B 7000N linear actuator from Elerover. This DC linear actuator is built for OEM equipment that needs repeatable push/pull motion under industrial duty.
- Carga máxima
- 7000 N
- Carrera
- 50 / 100 / 150 / 200 / 250 / 300 / 350 / 400 / 450 / 500 / 550 / 600 mm (optional and customizable) Loa
- Velocidad
- 5.5 mm/s – 35.0 mm/s
- Tensión
- 12 V / 24 V / 36 V / 48 V DC
- Grado IP
- IP65
- Ciclo de trabajo
- 25% (4 min continuous moving) IP Rat
Aplicaciones
- Construction
- Wheelchair
Especificaciones técnicas
| Carga máxima | 7000 N |
|---|---|
| Carrera | 50 / 100 / 150 / 200 / 250 / 300 / 350 / 400 / 450 / 500 / 550 / 600 mm (optional and customizable) Loa |
| Velocidad | 5.5 mm/s – 35.0 mm/s |
| Tensión | 12 V / 24 V / 36 V / 48 V DC |
| Grado IP | IP65 |
| Ciclo de trabajo | 25% (4 min continuous moving) IP Rat |
Performance matrix
| No-load speed | Full-load speed | Thrust | Self-locking force |
|---|---|---|---|
| 5.5 mm/s | 4.0 mm/s | 7000 N | 10000 N |
| 8.5 mm/s | 7.0 mm/s | 7000 N | 10000 N |
| 11.0 mm/s | 9.5 mm/s | 5000 N | 8000 N |
| 17.0 mm/s | 14.0 mm/s | 4000 N | 7000 N |
| 22.0 mm/s | 18.0 mm/s | 3000 N | 5000 N |
| 35.0 mm/s | 28.5 mm/s | 2000 N | 4000 N |
Solicitar documentos técnicos
Request an OEM quote
Share force, stroke, voltage and quantity. Elerover will map your RFQ to a published series or OEM configuration.
Quote context
Productos relacionados
12V 24V SLA08 8000N linear actuator 100mm stroke for construction machinery
SLA08 100mm stroke (retracted install length about 350 mm) suits construction machinery attachments that need roughly 100mm of controlled push/pull at up to 8000N. 12V/24V DC, IP65 housing, Φ13mm clevis ends, optional Hall for synchronized control.
Ver detalles → 12V 24V SLA08 8000N linear actuator 150mm stroke for industrial mover
SLA08 150mm stroke (retracted install length about 400 mm) targets industrial movers and transfer fixtures that need mid-short travel with high holding force. Same 8000N platform: 12V/24V, IP65, parallel motor layout, electronic limit switches.
Ver detalles → 12V 24V SLA08 8000N linear actuator 200mm stroke for heavy duty hatch
SLA08 200mm stroke (retracted install length about 450 mm) is sized for heavy-duty hatches and covers where geometry needs ~200mm of travel under high thrust. Clevis mounts simplify pin-joint hatch linkages; IP65 protects against washdown and outdoor spray.
Ver detalles → 12V 24V SLA08 8000N linear actuator 250mm stroke for agricultural equipment
12V/24V heavy-duty electric linear actuator with 250mm stroke and up to 8000N (1798 lbs) thrust. Optimized for agricultural equipment and industrial OEM motion systems. IP65, clevis mounts, optional Hall feedback.
Ver detalles →Controladores compatibles
SLA-SCN04 controlador síncrono One-Control-Four
Puede operar cuatro actuadores lineales eléctricos de forma completamente sincrónica. Control cableado mediante mango de control. Control inalámbrico mediante mando. Dos fu...
Ver detalles →
SLA-SCN02 controlador síncrono One-Control-Two
Puede operar dos actuadores lineales eléctricos de forma completamente sincrónica. Control cableado mediante mango de control. Control inalámbrico mediante mando. Dos fun...
Ver detalles →