Request Datasheet
Actuador lineal
Modelo SLA08
12 V DC 24 V DC SLA08 8,000 N linear actuator 500mm stroke for scissor lift
SLA08 500mm stroke (retracted install length about 750 mm) is the long common stroke in this pilot for scissor lifts and taller platform mechanisms.
Especificaciones clave
- Carga máxima
- 8000 N / 800 kg / 1798 lbs
- Carrera
- 500 mm
- Velocidad
- 5 mm/s – 50 mm/s
- Tensión
- 12 V / 24 V DC
Descripción del producto
SLA08 500mm stroke (retracted install length about 750 mm) is the long common stroke in this pilot for scissor lifts and taller platform mechanisms. At longer strokes, avoid continuous full-load end-of-stroke duty; select gearing for your lift time and peak load.
- Carga máxima
- 8000 N / 800 kg / 1798 lbs
- Carrera
- 500 mm
- Velocidad
- 5 mm/s – 50 mm/s
- Tensión
- 12 V / 24 V DC
- Grado IP
- IP65
- Realimentación
- Optional
Aplicaciones
- Scissor lifts
- Tall lifting platforms
- Maintenance and work platforms
- Industrial elevation stages
Ventajas
- Heavy-duty industrial electric linear actuator for high-load OEM motion
- Working voltage: 12V / 24V DC (36V / 48V optional)
- Max thrust / pull up to 8000N (approx. 1800 lbs / 800 kg)
- Stroke options from 50mm to 700mm (custom strokes available)
- Compact installation footprint with parallel motor layout
- Outer tube Φ63mm; motor housing Φ64mm
- Front and rear clevis mounts with Φ13mm mounting holes
- Built-in electronic limit switches (clutch protection optional)
Especificaciones técnicas
| Carga máxima | 8000 N / 800 kg / 1798 lbs |
|---|---|
| Carrera | 500 mm |
| Velocidad | 5 mm/s – 50 mm/s |
| Tensión | 12 V / 24 V DC |
| Grado IP | IP65 |
| Retracted length | 750 mm |
| Realimentación | Optional |
| Limit switch | Yes |
| Mounting type | Φ13mm clevis (front & rear) |
| Tipo de motor | Brushed DC |
| Housing material | Φ63mm |
Performance matrix
| No-load speed | Full-load speed | Thrust | Self-locking force |
|---|---|---|---|
| 5 mm/s | 3.5 mm/s | 8000 N / 800 kg / 1800 lbs | 8500 N / 850 kg / 1900 lbs |
| 8 mm/s | 6 mm/s | 7000 N / 700 kg / 1600 lbs | 7500 N / 750 kg / 1700 lbs |
| 10 mm/s | 7 mm/s | 6000 N / 600 kg / 1300 lbs | 6500 N / 650 kg / 1500 lbs |
| 12 mm/s | 9 mm/s | 5000 N / 500 kg / 1100 lbs | 5500 N / 550 kg / 1200 lbs |
| 16 mm/s | 12 mm/s | 4000 N / 400 kg / 880 lbs | 4500 N / 450 kg / 1000 lbs |
| 20 mm/s | 15 mm/s | 3000 N / 300 kg / 670 lbs | 3500 N / 350 kg / 790 lbs |
| 28 mm/s | 20 mm/s | 2000 N / 200 kg / 450 lbs | 2500 N / 250 kg / 560 lbs |
| 50 mm/s | 38 mm/s | 1000 N / 100 kg / 200 lbs | 1500 N / 150 kg / 340 lbs |
Solicitar documentos técnicos
Request an OEM quote
Share force, stroke, voltage and quantity. Elerover will map your RFQ to a published series or OEM configuration.
Quote context
Productos relacionados
12V 24V SLA08 8000N linear actuator 100mm stroke for construction machinery
SLA08 100mm stroke (retracted install length about 350 mm) suits construction machinery attachments that need roughly 100mm of controlled push/pull at up to 8000N. 12V/24V DC, IP65 housing, Φ13mm clevis ends, optional Hall for synchronized control.
Ver detalles → 12V 24V SLA08 8000N linear actuator 150mm stroke for industrial mover
SLA08 150mm stroke (retracted install length about 400 mm) targets industrial movers and transfer fixtures that need mid-short travel with high holding force. Same 8000N platform: 12V/24V, IP65, parallel motor layout, electronic limit switches.
Ver detalles → 12V 24V SLA08 8000N linear actuator 200mm stroke for heavy duty hatch
SLA08 200mm stroke (retracted install length about 450 mm) is sized for heavy-duty hatches and covers where geometry needs ~200mm of travel under high thrust. Clevis mounts simplify pin-joint hatch linkages; IP65 protects against washdown and outdoor spray.
Ver detalles → 12V 24V SLA08 8000N linear actuator 250mm stroke for agricultural equipment
12V/24V heavy-duty electric linear actuator with 250mm stroke and up to 8000N (1798 lbs) thrust. Optimized for agricultural equipment and industrial OEM motion systems. IP65, clevis mounts, optional Hall feedback.
Ver detalles →Controladores compatibles
SLA-SCN04 controlador síncrono One-Control-Four
Puede operar cuatro actuadores lineales eléctricos de forma completamente sincrónica. Control cableado mediante mango de control. Control inalámbrico mediante mando. Dos fu...
Ver detalles →
SLA-SCN02 controlador síncrono One-Control-Two
Puede operar dos actuadores lineales eléctricos de forma completamente sincrónica. Control cableado mediante mango de control. Control inalámbrico mediante mando. Dos fun...
Ver detalles →