The SLA08B 7000N 250mm stroke linear actuator is an IP65 waterproof 12V–48V industrial electric actuator delivering up to 7000N (1570 lbs) dynamic force. Typical retracted length 500 mm. Ideal for floor cleaning equipment, AGVs, solar tracking, agriculture and OEM automation.
SLA08B 7000N linear actuator
12V 24V SLA08B 7000N linear actuator 250mm stroke for floor cleaning equipment
12V/24V/36V/48V IP65 waterproof electric linear actuator with 250mm stroke and up to 7000N (1570 lbs) dynamic force. Parallel motor design for floor cleaning equipment and industrial OEM systems. Optional Hall feedback and manual override.
Manufactured and supplied by Elerover — Linear Actuator manufacturer and OEM partner for industrial, medical, furniture and solar motion systems.
Key Parameters
- Model
- SLA08B
- Working Voltage
- 12V / 24V / 36V / 48V DC
- Stroke
- 250mm
- Protection Class
- IP65
- Installation Length
- 500 mm
- Motor Type
- Brushed DC
- Duty Cycle
- 25%
- Primary Application
- floor cleaning equipment
Product Overview
Key Features
- Industrial waterproof electric linear actuator with parallel motor layout
- Working voltage: 12V / 24V / 36V / 48V DC
- Max dynamic force up to 7000N (approx. 1570 lbs / 700 kg)
- Self-locking force up to 10000N on Codes A and B
- Stroke options from 50mm to 600mm (custom up to 1000mm)
- Outer tube Φ68mm; stroke rod Φ30mm; motor Φ64mm
- IP65 weather protection for outdoor and harsh environments
- Duty cycle 25% with clutch / electronic overload protection options
- Optional Hall sensor, potentiometer, end-stop signal or reed switches
- Optional electrical + manual override operation mode
- Front and rear mounting ends rotatable 0° / 90°
Technical Specifications
| Model | SLA08B |
|---|---|
| Working Voltage | 12V / 24V / 36V / 48V DC |
| Stroke | 250mm |
| Installation Length | 500 mm |
| Max Dynamic Load | 7000N / 700 kg / 1570 lbs |
| Self-locking Force | Up to 10000N |
| Outer Tube | Φ68mm |
| Stroke Rod | Φ30mm |
| Motor Diameter | Φ64mm |
| Protection Class | IP65 |
| Duty Cycle | 25% |
| Motor Type | Brushed DC |
| Lead Screw | ACME |
| Position Feedback | Optional Hall / potentiometer / end-stop / reed |
| Primary Application | floor cleaning equipment |
Applications
- Floor cleaning equipment
- Robotic vehicles and AGVs
- Solar tracker systems
- Construction machinery
- Agricultural and harvesting equipment
- Boat hatches and campers
- Wheelchair and accessibility lifts
FAQ
What is the SLA08B?
12V/24V/36V/48V IP65 waterproof electric linear actuator with 250mm stroke and up to 7000N (1570 lbs) dynamic force. Parallel motor design for floor cleaning equipment and industrial OEM systems. Optional Hall feedback and manual override.
Does Elerover manufacture the SLA08B?
Yes. Elerover is a linear actuator manufacturer and supplier. This model supports OEM configuration options listed in the product data—share your duty cycle and quantity for a factory quote.
What are the key specifications of the SLA08B?
Key ratings from the product specifications include voltage 12V / 24V / 36V / 48V DC, load 7000N, stroke 250mm, protection IP65. See the Technical Specifications section on this page for the full table.
Which applications is the SLA08B used for?
Typical applications include Floor cleaning equipment, Robotic vehicles and AGVs, Solar tracker systems, Construction machinery.
How do I request a quote for the SLA08B?
Send load, stroke, voltage, IP rating, duty cycle, quantity and any OEM options you need via the contact form or WhatsApp.
Additional Details
SLA08B 7000N Waterproof Linear Actuator
12V 24V SLA08B 7000N linear actuator 250mm stroke for floor cleaning equipment
This 250mm IP65 industrial electric linear actuator delivers up to 7000N (1570 lbs) dynamic force on 12V–48V DC. Parallel motor packaging keeps installation compact for floor cleaning equipment and other OEM motion systems that need reliable push / pull outdoors.
Model
SLA08B
SLA08B
Stroke
250mm
250mm
Max Dynamic Force
7000N / 1570 lbs
7000N / 1570 lbs
Voltage
12V / 24V / 36V / 48V
12V / 24V / 36V / 48V
Install Length
500 mm
500 mm
Product Structure
- Stainless steel rod — extends and retracts to deliver linear motion
- Zi-Ni coated mounting ends — corrosion-resistant front and rear mounts
- Aluminum alloy top cap — seals the outer tube
- Aluminum alloy housing — main structural enclosure (Φ68mm tube)
- Parallel brushed DC motor — Φ64mm motor beside the drive tube
- Waterproof cable connector — power / signal exit with industrial gland
- Built-in limit switches — auto-stop at full extend / retract (standard)
- Manual override — optional emergency hand operation
Operation
Connect red and black leads to a matching DC supply. One polarity extends the rod; reversing polarity retracts it. Standard limit switches shut off the motor at end of travel. When ordered with Hall or potentiometer feedback, additional signal wires support position measurement and synchronized multi-actuator control.
Stroke & Installation Length
Retracted center-to-center length depends on front/rear mount combination. A common industrial setup uses approximately L ≥ S + 250mm. This 250mm configuration is listed with a typical retracted length of 500 mm. Minimum install length and extras for long strokes are adjustable during production.
External Dimensions
- Outer tube diameter: Φ68mm
- Stroke rod diameter: Φ30mm
- Motor diameter: Φ64mm
- Overall height: approx. 151.4mm
- Gear housing width: approx. 72.9mm
- Rear mount eye width: approx. 26mm
- Stroke (S) and retracted length (L) tolerance: typically ±3mm
Speed vs Load
Choose the transmission code that matches your required thrust, speed and duty cycle. Speeds are ±10% at about 20°C with a stable DC supply.
Different Speeds and Corresponding Maximum Thrust
| Code | Max Dynamic Load | Self-locking | Ratio | Pitch | Free-load Speed | Full-load Speed | Max Stroke |
|---|---|---|---|---|---|---|---|
| A | 7000 N / 700 kg / 1570 lbs | 10000 N | 40:1 | 3.17mm | 5.5mm/s | 4.0mm/s | 1000mm |
| B | 7000 N / 700 kg / 1570 lbs | 10000 N | 40:1 | 5mm | 8.5mm/s | 7.0mm/s | 1000mm |
| C | 5000 N / 500 kg / 1120 lbs | 8000 N | 20:1 | 3.17mm | 11.0mm/s | 9.5mm/s | 1000mm |
| D | 4000 N / 400 kg / 900 lbs | 7000 N | 20:1 | 5mm | 17.0mm/s | 14.0mm/s | 1000mm |
| E | 3000 N / 300 kg / 670 lbs | 5000 N | 10:1 | 3.17mm | 22.0mm/s | 18.0mm/s | 1000mm |
| F | 2000 N / 200 kg / 450 lbs | 4000 N | 10:1 | 5mm | 35.0mm/s | 28.5mm/s | 1000mm |
Speed & Load Notes:
- Example: for a real load near 3900N, Code D is suitable; Codes C, B or A provide more safety margin and longer service life.
- Do not exceed about four minutes continuous operation at full load (25% duty cycle) at 20°C.
- Maximum customizable stroke depends on load, speed and force direction — contact engineering for project sizing.
- Maximum pull force is slightly less than maximum dynamic thrust.
- For hinged loads, required actuator force can be 2–5× the equipment weight depending on mounting geometry.
Need a Custom Configuration?
Contact Elerover for voltage, stroke, transmission code, feedback, mounts, cable length and connector customization. Messages go to [email protected].
Similar Products
12V 24V SLA08B 7000N linear actuator 100mm stroke for AGV guidance system
12V/24V/36V/48V IP65 waterproof electric linear actuator with 100mm stroke and up to 7000N (1570 lbs) dynamic force. Parallel motor design for AGV guidance system and industrial OEM systems. Optional Hall feedback and manual override.
View Details → 12V 24V SLA08B 7000N linear actuator 150mm stroke for camper lift mechanism
12V/24V/36V/48V IP65 waterproof electric linear actuator with 150mm stroke and up to 7000N (1570 lbs) dynamic force. Parallel motor design for camper lift mechanism and industrial OEM systems. Optional Hall feedback and manual override.
View Details → 12V 24V SLA08B 7000N linear actuator 200mm stroke for industrial door opener
12V/24V/36V/48V IP65 waterproof electric linear actuator with 200mm stroke and up to 7000N (1570 lbs) dynamic force. Parallel motor design for industrial door opener and industrial OEM systems. Optional Hall feedback and manual override.
View Details → 12V 24V SLA08B 7000N linear actuator 300mm stroke for lawn mower deck lift
12V/24V/36V/48V IP65 waterproof electric linear actuator with 300mm stroke and up to 7000N (1570 lbs) dynamic force. Parallel motor design for lawn mower deck lift and industrial OEM systems. Optional Hall feedback and manual override.
View Details → 12V 24V SLA08B 7000N linear actuator 350mm stroke for snow plow blade
12V/24V/36V/48V IP65 waterproof electric linear actuator with 350mm stroke and up to 7000N (1570 lbs) dynamic force. Parallel motor design for snow plow blade and industrial OEM systems. Optional Hall feedback and manual override.
View Details → 12V 24V SLA08B 7000N linear actuator 400mm stroke for boat hatch automation
12V/24V/36V/48V IP65 waterproof electric linear actuator with 400mm stroke and up to 7000N (1570 lbs) dynamic force. Parallel motor design for boat hatch automation and industrial OEM systems. Optional Hall feedback and manual override.
View Details →Compatible Controllers
SLA-SCN04 one control four synchronized controller
It can operate four electric linear actuators to run completely synchronously. Wired control via a control handle. Wireless control via a remote. Two fu...
View Details →
SLA-SCN02 one control two Synchronous Controller
It can operate Two electric linear actuators to run completely synchronously. Wired control via a control handle. Wireless control via a remote. Two fun...
View Details →