The SLA08B 7000N 450mm stroke linear actuator is an IP65 waterproof 12V–48V industrial electric actuator delivering up to 7000N (1570 lbs) dynamic force. Typical retracted length 700 mm. Ideal for solar tracker system, AGVs, solar tracking, agriculture and OEM automation.
Vérin linéaire SLA08B 7000N
12V 24V SLA08B 7000N linear actuator 450mm stroke for solar tracker system
12V/24V/36V/48V IP65 waterproof electric linear actuator with 450mm stroke and up to 7000N (1570 lbs) dynamic force. Parallel motor design for solar tracker system and industrial OEM systems. Optional Hall feedback and manual override.
Manufactured and supplied by Elerover — Vérin linéaire manufacturer and OEM partner for industrial, medical, furniture and solar motion systems.
Paramètres clés
- Model
- SLA08B
- Working Voltage
- 12V / 24V / 36V / 48V DC
- Stroke
- 450mm
- Protection Class
- IP65
- Installation Length
- 700 mm
- Motor Type
- Brushed DC
- Duty Cycle
- 25%
- Primary Application
- solar tracker system
Aperçu du produit
Caractéristiques clés
- Industrial waterproof electric linear actuator with parallel motor layout
- Working voltage: 12V / 24V / 36V / 48V DC
- Max dynamic force up to 7000N (approx. 1570 lbs / 700 kg)
- Self-locking force up to 10000N on Codes A and B
- Stroke options from 50mm to 600mm (custom up to 1000mm)
- Outer tube Φ68mm; stroke rod Φ30mm; motor Φ64mm
- IP65 weather protection for outdoor and harsh environments
- Duty cycle 25% with clutch / electronic overload protection options
- Optional Hall sensor, potentiometer, end-stop signal or reed switches
- Optional electrical + manual override operation mode
- Front and rear mounting ends rotatable 0° / 90°
Spécifications techniques
| Model | SLA08B |
|---|---|
| Working Voltage | 12V / 24V / 36V / 48V DC |
| Stroke | 450mm |
| Installation Length | 700 mm |
| Max Dynamic Load | 7000N / 700 kg / 1570 lbs |
| Self-locking Force | Up to 10000N |
| Outer Tube | Φ68mm |
| Stroke Rod | Φ30mm |
| Motor Diameter | Φ64mm |
| Protection Class | IP65 |
| Duty Cycle | 25% |
| Motor Type | Brushed DC |
| Lead Screw | ACME |
| Position Feedback | Optional Hall / potentiometer / end-stop / reed |
| Primary Application | solar tracker system |
Applications
- Solar tracker system
- Robotic vehicles and AGVs
- Solar tracker systems
- Construction machinery
- Agricultural and harvesting equipment
- Boat hatches and campers
- Wheelchair and accessibility lifts
FAQ
Qu’est-ce que le SLA08B ?
12V/24V/36V/48V IP65 waterproof electric linear actuator with 450mm stroke and up to 7000N (1570 lbs) dynamic force. Parallel motor design for solar tracker system and industrial OEM systems. Optional Hall feedback and manual override.
Elerover fabrique-t-il le SLA08B ?
Oui. Elerover est fabricant et fournisseur de vérin linéaire. Ce modèle propose des options OEM indiquées dans les données produit — indiquez le cycle de service et la quantité pour un devis usine.
Quelles sont les spécifications clés du SLA08B ?
Les valeurs issues des spécifications produit incluent tension 12V / 24V / 36V / 48V DC, charge 7000N, course 450mm, protection IP65. Consultez le tableau Spécifications techniques sur cette page.
Pour quelles applications le SLA08B est-il prévu ?
Applications typiques : Solar tracker system, Robotic vehicles and AGVs, Solar tracker systems, Construction machinery.
Comment demander un devis pour le SLA08B ?
Indiquez charge, course, tension, indice IP, cycle de service, quantité et options OEM via le formulaire de contact ou WhatsApp.
Détails supplémentaires
SLA08B 7000N Waterproof Linear Actuator
12V 24V SLA08B 7000N linear actuator 450mm stroke for solar tracker system
This 450mm IP65 industrial electric linear actuator delivers up to 7000N (1570 lbs) dynamic force on 12V–48V DC. Parallel motor packaging keeps installation compact for solar tracker system and other OEM motion systems that need reliable push / pull outdoors.
Model
SLA08B
SLA08B
Stroke
450mm
450mm
Max Dynamic Force
7000N / 1570 lbs
7000N / 1570 lbs
Voltage
12V / 24V / 36V / 48V
12V / 24V / 36V / 48V
Install Length
700 mm
700 mm
Product Structure
- Stainless steel rod — extends and retracts to deliver linear motion
- Zi-Ni coated mounting ends — corrosion-resistant front and rear mounts
- Aluminum alloy top cap — seals the outer tube
- Aluminum alloy housing — main structural enclosure (Φ68mm tube)
- Parallel brushed DC motor — Φ64mm motor beside the drive tube
- Waterproof cable connector — power / signal exit with industrial gland
- Built-in limit switches — auto-stop at full extend / retract (standard)
- Manual override — optional emergency hand operation
Operation
Connect red and black leads to a matching DC supply. One polarity extends the rod; reversing polarity retracts it. Standard limit switches shut off the motor at end of travel. When ordered with Hall or potentiometer feedback, additional signal wires support position measurement and synchronized multi-actuator control.
Stroke & Installation Length
Retracted center-to-center length depends on front/rear mount combination. A common industrial setup uses approximately L ≥ S + 250mm. This 450mm configuration is listed with a typical retracted length of 700 mm. Minimum install length and extras for long strokes are adjustable during production.
External Dimensions
- Outer tube diameter: Φ68mm
- Stroke rod diameter: Φ30mm
- Motor diameter: Φ64mm
- Overall height: approx. 151.4mm
- Gear housing width: approx. 72.9mm
- Rear mount eye width: approx. 26mm
- Stroke (S) and retracted length (L) tolerance: typically ±3mm
Speed vs Load
Choose the transmission code that matches your required thrust, speed and duty cycle. Speeds are ±10% at about 20°C with a stable DC supply.
Different Speeds and Corresponding Maximum Thrust
| Code | Max Dynamic Load | Self-locking | Ratio | Pitch | Free-load Speed | Full-load Speed | Max Stroke |
|---|---|---|---|---|---|---|---|
| A | 7000 N / 700 kg / 1570 lbs | 10000 N | 40:1 | 3.17mm | 5.5mm/s | 4.0mm/s | 1000mm |
| B | 7000 N / 700 kg / 1570 lbs | 10000 N | 40:1 | 5mm | 8.5mm/s | 7.0mm/s | 1000mm |
| C | 5000 N / 500 kg / 1120 lbs | 8000 N | 20:1 | 3.17mm | 11.0mm/s | 9.5mm/s | 1000mm |
| D | 4000 N / 400 kg / 900 lbs | 7000 N | 20:1 | 5mm | 17.0mm/s | 14.0mm/s | 1000mm |
| E | 3000 N / 300 kg / 670 lbs | 5000 N | 10:1 | 3.17mm | 22.0mm/s | 18.0mm/s | 1000mm |
| F | 2000 N / 200 kg / 450 lbs | 4000 N | 10:1 | 5mm | 35.0mm/s | 28.5mm/s | 1000mm |
Speed & Load Notes:
- Example: for a real load near 3900N, Code D is suitable; Codes C, B or A provide more safety margin and longer service life.
- Do not exceed about four minutes continuous operation at full load (25% duty cycle) at 20°C.
- Maximum customizable stroke depends on load, speed and force direction — contact engineering for project sizing.
- Maximum pull force is slightly less than maximum dynamic thrust.
- For hinged loads, required actuator force can be 2–5× the equipment weight depending on mounting geometry.
Need a Custom Configuration?
Contact Elerover for voltage, stroke, transmission code, feedback, mounts, cable length and connector customization. Messages go to [email protected].
Produits similaires
12V 24V SLA08B 7000N linear actuator 100mm stroke for AGV guidance system
12V/24V/36V/48V IP65 waterproof electric linear actuator with 100mm stroke and up to 7000N (1570 lbs) dynamic force. Parallel motor design for AGV guidance system and industrial OEM systems. Optional Hall feedback and manual override.
Voir les détails → 12V 24V SLA08B 7000N linear actuator 150mm stroke for camper lift mechanism
12V/24V/36V/48V IP65 waterproof electric linear actuator with 150mm stroke and up to 7000N (1570 lbs) dynamic force. Parallel motor design for camper lift mechanism and industrial OEM systems. Optional Hall feedback and manual override.
Voir les détails → 12V 24V SLA08B 7000N linear actuator 200mm stroke for industrial door opener
12V/24V/36V/48V IP65 waterproof electric linear actuator with 200mm stroke and up to 7000N (1570 lbs) dynamic force. Parallel motor design for industrial door opener and industrial OEM systems. Optional Hall feedback and manual override.
Voir les détails → 12V 24V SLA08B 7000N linear actuator 250mm stroke for floor cleaning equipment
12V/24V/36V/48V IP65 waterproof electric linear actuator with 250mm stroke and up to 7000N (1570 lbs) dynamic force. Parallel motor design for floor cleaning equipment and industrial OEM systems. Optional Hall feedback and manual override.
Voir les détails → 12V 24V SLA08B 7000N linear actuator 300mm stroke for lawn mower deck lift
12V/24V/36V/48V IP65 waterproof electric linear actuator with 300mm stroke and up to 7000N (1570 lbs) dynamic force. Parallel motor design for lawn mower deck lift and industrial OEM systems. Optional Hall feedback and manual override.
Voir les détails → 12V 24V SLA08B 7000N linear actuator 350mm stroke for snow plow blade
12V/24V/36V/48V IP65 waterproof electric linear actuator with 350mm stroke and up to 7000N (1570 lbs) dynamic force. Parallel motor design for snow plow blade and industrial OEM systems. Optional Hall feedback and manual override.
Voir les détails →Contrôleurs compatibles
SLA-SCN04 contrôleur synchrone un-pour-quatre
Permet de faire fonctionner quatre vérins linéaires électriques en parfaite synchronisation. Commande filaire via poignée de contrôle. Commande sans fil via télécommande. Deux boutons fon...
Voir les détails →
SLA-SCN02 contrôleur synchrone un-pour-deux
Permet de faire fonctionner deux vérins linéaires électriques en parfaite synchronisation. Commande filaire via poignée de contrôle. Commande sans fil via télécommande. Deux boutons fon...
Voir les détails →