The SLA08 8000N 350mm stroke linear actuator is a heavy-duty 12V/24V industrial electric actuator delivering up to 8000N (1798 lbs) thrust. Retracted installation length is 600 mm. Ideal for gate automation, lifting platforms, construction machinery, agriculture and OEM automation.
SLA08 8000N Linearantrieb
12V 24V SLA08 8000N linear actuator 350mm stroke for gate automation
12V/24V heavy-duty electric linear actuator with 350mm stroke and up to 8000N (1798 lbs) thrust. Optimized for gate automation and industrial OEM motion systems. IP65, clevis mounts, optional Hall feedback.
Manufactured and supplied by Elerover — Linearantrieb manufacturer and OEM partner for industrial, medical, furniture and solar motion systems.
Wichtige Parameter
- Model
- SLA08
- Working Voltage
- 12V / 24V DC
- Stroke
- 350mm
- Max Load Capacity
- 8000N / 800 kg / 1798 lbs
- Protection Class
- IP65
- Installation Length
- 600 mm
- Motor Type
- Brushed DC
- Primary Application
- gate automation
Produktübersicht
Wesentliche Merkmale
- Heavy-duty industrial electric linear actuator for high-load OEM motion
- Working voltage: 12V / 24V DC (36V / 48V optional)
- Max thrust / pull up to 8000N (approx. 1800 lbs / 800 kg)
- Stroke options from 50mm to 700mm (custom strokes available)
- Compact installation footprint with parallel motor layout
- Outer tube Φ63mm; motor housing Φ64mm
- Front and rear clevis mounts with Φ13mm mounting holes
- Built-in electronic limit switches (clutch protection optional)
- IP65 dust-tight and water-jet protection
- Optional built-in Hall signal for position feedback
- Two-wire DC control — reverse polarity to change direction
Technische Spezifikationen
| Model | SLA08 |
|---|---|
| Working Voltage | 12V / 24V DC |
| Stroke | 350mm |
| Installation Length | 600 mm |
| Max Load Capacity | 8000N / 800 kg / 1798 lbs |
| Outer Tube | Φ63mm |
| Motor Diameter | Φ64mm |
| Mounting Hole | Φ13mm clevis (front & rear) |
| Protection Class | IP65 |
| Motor Type | Brushed DC |
| Built-in Limit Switch | Yes |
| Hall Signal | Optional |
| Primary Application | gate automation |
Anwendungen
- Gate automation
- Lifting platforms
- Construction machinery
- Agricultural equipment
- Gate automation
- Solar tracking systems
- Material handling
Zusätzliche Details
SLA08 8000N Linear Actuator
12V 24V SLA08 8000N linear actuator 350mm stroke for gate automation
This 350mm heavy-duty electric linear actuator delivers up to 8000N (1798 lbs) thrust on 12V or 24V DC. It is engineered for gate automation and other industrial motion systems that need reliable high-force push / pull with compact installation dimensions.
Model
SLA08
SLA08
Stroke
350mm
350mm
Max Thrust
8000N / 1798 lbs
8000N / 1798 lbs
Voltage
12V / 24V DC
12V / 24V DC
Install Length
600 mm
600 mm
Product Structure
- Front connector — clevis eye for load or application mounting
- Stroke rod — extends and retracts to deliver linear motion
- Outer tube — Φ63mm industrial housing for the drive screw
- Gear housing — compact parallel-motor gearbox base
- Built-in limit switches — stop the actuator at fully extended or retracted position
- Rear connector — clevis eye for base mounting
- Brushed DC motor — Φ64mm motor for high-load duty
- Power cable — connects to the DC power supply
Operation
Connect the actuator leads to a 12V or 24V DC supply. One polarity extends the stroke rod; reversing polarity retracts it. Built-in limit switches cut motor current at the end of each stroke. Optional Hall signal wiring supports position feedback when ordered with that option.
Stroke & Installation Length
With built-in limit switches, retracted center-to-center length L = S + 250mm. With clutch-type protection, L = S + 200mm. This 350mm built-in limit switch model has a retracted length of 600 mm.
Speed vs Load
Different speeds correspond to different maximum thrust and self-locking force. Use the table below to select the right SLA08 gearing for your duty cycle.
Different Speeds and Corresponding Maximum Thrust
| No-load Speed | Full load Speed | Maximum Thrust | Self-locking Force |
|---|---|---|---|
| 5mm/s | 3.5mm/s | 8000 N / 800 kg / 1800 lbs | 8500 N / 850 kg / 1900 lbs |
| 8mm/s | 6mm/s | 7000 N / 700 kg / 1600 lbs | 7500 N / 750 kg / 1700 lbs |
| 10mm/s | 7mm/s | 6000 N / 600 kg / 1300 lbs | 6500 N / 650 kg / 1500 lbs |
| 12mm/s | 9mm/s | 5000 N / 500 kg / 1100 lbs | 5500 N / 550 kg / 1200 lbs |
| 16mm/s | 12mm/s | 4000 N / 400 kg / 880 lbs | 4500 N / 450 kg / 1000 lbs |
| 20mm/s | 15mm/s | 3000 N / 300 kg / 670 lbs | 3500 N / 350 kg / 790 lbs |
| 28mm/s | 20mm/s | 2000 N / 200 kg / 450 lbs | 2500 N / 250 kg / 560 lbs |
| 50mm/s | 38mm/s | 1000 N / 100 kg / 200 lbs | 1500 N / 150 kg / 340 lbs |
Speed & Load Notes:
- The above data is the maximum load capacity for vertical operation. For hinged loads (for example a cellar door), the force on the actuator is often 2–5× the equipment weight depending on mounting geometry. Contact us if you need help calculating the required thrust.
- No-load speed is shown above; actual working speed decreases as load increases. Full-load speed is approximately 60–70% of no-load speed.
- Different speeds correspond to different maximum loads. Select speed according to both the travel time and maximum load you need.
- Continuous operation at maximum load is not recommended. Running at about half of the maximum load typically improves service life.
- For strokes greater than 500mm, avoid operating at full stroke under heavy load. If you need 600mm useful stroke under load, we recommend ordering 700–800mm stroke.
- Maximum pull force is slightly less than maximum thrust.
Need a Custom Configuration?
Contact Elerover for voltage, stroke, speed, Hall feedback, cable length and connector customization for your OEM project. Messages go to [email protected].
Ähnliche Produkte
12V 24V SLA08 8000N linear actuator 100mm stroke for construction machinery
12V/24V heavy-duty electric linear actuator with 100mm stroke and up to 8000N (1798 lbs) thrust. Optimized for construction machinery and industrial OEM motion systems. IP65, clevis mounts, optional Hall feedback.
Details ansehen → 12V 24V SLA08 8000N linear actuator 150mm stroke for industrial mover
12V/24V heavy-duty electric linear actuator with 150mm stroke and up to 8000N (1798 lbs) thrust. Optimized for industrial mover and industrial OEM motion systems. IP65, clevis mounts, optional Hall feedback.
Details ansehen → 12V 24V SLA08 8000N linear actuator 200mm stroke for heavy duty hatch
12V/24V heavy-duty electric linear actuator with 200mm stroke and up to 8000N (1798 lbs) thrust. Optimized for heavy duty hatch and industrial OEM motion systems. IP65, clevis mounts, optional Hall feedback.
Details ansehen → 12V 24V SLA08 8000N linear actuator 250mm stroke for agricultural equipment
12V/24V heavy-duty electric linear actuator with 250mm stroke and up to 8000N (1798 lbs) thrust. Optimized for agricultural equipment and industrial OEM motion systems. IP65, clevis mounts, optional Hall feedback.
Details ansehen → 12V 24V SLA08 8000N linear actuator 300mm stroke for dump trailer
12V/24V heavy-duty electric linear actuator with 300mm stroke and up to 8000N (1798 lbs) thrust. Optimized for dump trailer and industrial OEM motion systems. IP65, clevis mounts, optional Hall feedback.
Details ansehen → 12V 24V SLA08 8000N linear actuator 400mm stroke for solar tracker
12V/24V heavy-duty electric linear actuator with 400mm stroke and up to 8000N (1798 lbs) thrust. Optimized for solar tracker and industrial OEM motion systems. IP65, clevis mounts, optional Hall feedback.
Details ansehen →Kompatible Controller
SLA-SCN04 One-Control-Four-Synchronsteuerung
Ermöglicht den vollständig synchronen Betrieb von vier elektrischen Linearantrieben. Kabelgebundene Steuerung über Bediengriff. Funksteuerung per Fernbedienung. Zwei Funktionstasten...
Details ansehen →
SLA-SCN02 One-Control-Two-Synchronsteuerung
Ermöglicht den vollständig synchronen Betrieb von zwei elektrischen Linearantrieben. Kabelgebundene Steuerung über Bediengriff. Funksteuerung per Fernbedienung. Zwei Funktionstasten...
Details ansehen →