Request Datasheet
مشغل خطي
SLA08B 7,000 N مشغل خطي
SLA08B 7000N linear actuator from Elerover.
المواصفات الرئيسية
- الحمل الأقصى
- 7000 N
- الشوط
- 50 / 100 / 150 / 200 / 250 / 300 / 350 / 400 / 450 / 500 / 550 / 600 mm (optional and customizable) Loa
- السرعة
- 5.5 mm/s – 35.0 mm/s
- الجهد
- 12 V / 24 V / 36 V / 48 V DC
نظرة عامة على المنتج
SLA08B 7000N linear actuator from Elerover. This DC linear actuator is built for OEM equipment that needs repeatable push/pull motion under industrial duty.
- الحمل الأقصى
- 7000 N
- الشوط
- 50 / 100 / 150 / 200 / 250 / 300 / 350 / 400 / 450 / 500 / 550 / 600 mm (optional and customizable) Loa
- السرعة
- 5.5 mm/s – 35.0 mm/s
- الجهد
- 12 V / 24 V / 36 V / 48 V DC
- درجة الحماية IP
- IP65
- دورة العمل
- 25% (4 min continuous moving) IP Rat
التطبيقات
- Construction
- Wheelchair
المواصفات الفنية
| الحمل الأقصى | 7000 N |
|---|---|
| الشوط | 50 / 100 / 150 / 200 / 250 / 300 / 350 / 400 / 450 / 500 / 550 / 600 mm (optional and customizable) Loa |
| السرعة | 5.5 mm/s – 35.0 mm/s |
| الجهد | 12 V / 24 V / 36 V / 48 V DC |
| درجة الحماية IP | IP65 |
| دورة العمل | 25% (4 min continuous moving) IP Rat |
Performance matrix
| No-load speed | Full-load speed | Thrust | Self-locking force |
|---|---|---|---|
| 5.5 mm/s | 4.0 mm/s | 7000 N | 10000 N |
| 8.5 mm/s | 7.0 mm/s | 7000 N | 10000 N |
| 11.0 mm/s | 9.5 mm/s | 5000 N | 8000 N |
| 17.0 mm/s | 14.0 mm/s | 4000 N | 7000 N |
| 22.0 mm/s | 18.0 mm/s | 3000 N | 5000 N |
| 35.0 mm/s | 28.5 mm/s | 2000 N | 4000 N |
طلب المستندات الفنية
Request an OEM quote
Share force, stroke, voltage and quantity. Elerover will map your RFQ to a published series or OEM configuration.
المنتجات المرتبطة
12V 24V SLA08 8000N linear actuator 100mm stroke for construction machinery
SLA08 100mm stroke (retracted install length about 350 mm) suits construction machinery attachments that need roughly 100mm of controlled push/pull at up to 8000N. 12V/24V DC, IP65 housing, Φ13mm clevis ends, optional Hall for synchronized control.
عرض التفاصيل ←
12V 24V SLA08 8000N linear actuator 150mm stroke for industrial mover
SLA08 150mm stroke (retracted install length about 400 mm) targets industrial movers and transfer fixtures that need mid-short travel with high holding force. Same 8000N platform: 12V/24V, IP65, parallel motor layout, electronic limit switches.
عرض التفاصيل ←
12V 24V SLA08 8000N linear actuator 200mm stroke for heavy duty hatch
SLA08 200mm stroke (retracted install length about 450 mm) is sized for heavy-duty hatches and covers where geometry needs ~200mm of travel under high thrust. Clevis mounts simplify pin-joint hatch linkages; IP65 protects against washdown and outdoor spray.
عرض التفاصيل ←
12V 24V SLA08 8000N linear actuator 250mm stroke for agricultural equipment
12V/24V heavy-duty electric linear actuator with 250mm stroke and up to 8000N (1798 lbs) thrust. Optimized for agricultural equipment and industrial OEM motion systems. IP65, clevis mounts, optional Hall feedback.
عرض التفاصيل ←وحدات التحكم المتوافقة
SLA-SCN04 وحدة تحكم متزامنة One-Control-Four
يمكنه تشغيل أربعة مشغلات خطية كهربائية بشكل متزامن تمامًا. تحكم سلكي عبر مقبض تحكم. تحكم لاسلكي عبر جهاز تحكم عن بعد. وظيفتان fu...
عرض التفاصيل ←
SLA-SCN02 وحدة تحكم متزامنة One-Control-Two
يمكنه تشغيل مشغلين خطيين كهربائيين بشكل متزامن تمامًا. تحكم سلكي عبر مقبض تحكم. تحكم لاسلكي عبر جهاز تحكم عن بعد. وظيفتان fun...
عرض التفاصيل ←