Request Datasheet
مشغل خطي
الطراز SLA08
12 V DC 24 V DC SLA08 8,000 N linear actuator 500mm stroke for scissor lift
SLA08 500mm stroke (retracted install length about 750 mm) is the long common stroke in this pilot for scissor lifts and taller platform mechanisms.
المواصفات الرئيسية
- الحمل الأقصى
- 8000 N / 800 kg / 1798 lbs
- الشوط
- 500 mm
- السرعة
- 5 mm/s – 50 mm/s
- الجهد
- 12 V / 24 V DC
نظرة عامة على المنتج
SLA08 500mm stroke (retracted install length about 750 mm) is the long common stroke in this pilot for scissor lifts and taller platform mechanisms. At longer strokes, avoid continuous full-load end-of-stroke duty; select gearing for your lift time and peak load.
- الحمل الأقصى
- 8000 N / 800 kg / 1798 lbs
- الشوط
- 500 mm
- السرعة
- 5 mm/s – 50 mm/s
- الجهد
- 12 V / 24 V DC
- درجة الحماية IP
- IP65
- التغذية الراجعة
- Optional
التطبيقات
- Scissor lifts
- Tall lifting platforms
- Maintenance and work platforms
- Industrial elevation stages
المزايا
- Heavy-duty industrial electric linear actuator for high-load OEM motion
- Working voltage: 12V / 24V DC (36V / 48V optional)
- Max thrust / pull up to 8000N (approx. 1800 lbs / 800 kg)
- Stroke options from 50mm to 700mm (custom strokes available)
- Compact installation footprint with parallel motor layout
- Outer tube Φ63mm; motor housing Φ64mm
- Front and rear clevis mounts with Φ13mm mounting holes
- Built-in electronic limit switches (clutch protection optional)
المواصفات الفنية
| الحمل الأقصى | 8000 N / 800 kg / 1798 lbs |
|---|---|
| الشوط | 500 mm |
| السرعة | 5 mm/s – 50 mm/s |
| الجهد | 12 V / 24 V DC |
| درجة الحماية IP | IP65 |
| Retracted length | 750 mm |
| التغذية الراجعة | Optional |
| Limit switch | Yes |
| Mounting type | Φ13mm clevis (front & rear) |
| نوع المحرك | Brushed DC |
| Housing material | Φ63mm |
Performance matrix
| No-load speed | Full-load speed | Thrust | Self-locking force |
|---|---|---|---|
| 5 mm/s | 3.5 mm/s | 8000 N / 800 kg / 1800 lbs | 8500 N / 850 kg / 1900 lbs |
| 8 mm/s | 6 mm/s | 7000 N / 700 kg / 1600 lbs | 7500 N / 750 kg / 1700 lbs |
| 10 mm/s | 7 mm/s | 6000 N / 600 kg / 1300 lbs | 6500 N / 650 kg / 1500 lbs |
| 12 mm/s | 9 mm/s | 5000 N / 500 kg / 1100 lbs | 5500 N / 550 kg / 1200 lbs |
| 16 mm/s | 12 mm/s | 4000 N / 400 kg / 880 lbs | 4500 N / 450 kg / 1000 lbs |
| 20 mm/s | 15 mm/s | 3000 N / 300 kg / 670 lbs | 3500 N / 350 kg / 790 lbs |
| 28 mm/s | 20 mm/s | 2000 N / 200 kg / 450 lbs | 2500 N / 250 kg / 560 lbs |
| 50 mm/s | 38 mm/s | 1000 N / 100 kg / 200 lbs | 1500 N / 150 kg / 340 lbs |
طلب المستندات الفنية
Request an OEM quote
Share force, stroke, voltage and quantity. Elerover will map your RFQ to a published series or OEM configuration.
المنتجات المرتبطة
12V 24V SLA08 8000N linear actuator 100mm stroke for construction machinery
SLA08 100mm stroke (retracted install length about 350 mm) suits construction machinery attachments that need roughly 100mm of controlled push/pull at up to 8000N. 12V/24V DC, IP65 housing, Φ13mm clevis ends, optional Hall for synchronized control.
عرض التفاصيل ←
12V 24V SLA08 8000N linear actuator 150mm stroke for industrial mover
SLA08 150mm stroke (retracted install length about 400 mm) targets industrial movers and transfer fixtures that need mid-short travel with high holding force. Same 8000N platform: 12V/24V, IP65, parallel motor layout, electronic limit switches.
عرض التفاصيل ←
12V 24V SLA08 8000N linear actuator 200mm stroke for heavy duty hatch
SLA08 200mm stroke (retracted install length about 450 mm) is sized for heavy-duty hatches and covers where geometry needs ~200mm of travel under high thrust. Clevis mounts simplify pin-joint hatch linkages; IP65 protects against washdown and outdoor spray.
عرض التفاصيل ←
12V 24V SLA08 8000N linear actuator 250mm stroke for agricultural equipment
12V/24V heavy-duty electric linear actuator with 250mm stroke and up to 8000N (1798 lbs) thrust. Optimized for agricultural equipment and industrial OEM motion systems. IP65, clevis mounts, optional Hall feedback.
عرض التفاصيل ←وحدات التحكم المتوافقة
SLA-SCN04 وحدة تحكم متزامنة One-Control-Four
يمكنه تشغيل أربعة مشغلات خطية كهربائية بشكل متزامن تمامًا. تحكم سلكي عبر مقبض تحكم. تحكم لاسلكي عبر جهاز تحكم عن بعد. وظيفتان fu...
عرض التفاصيل ←
SLA-SCN02 وحدة تحكم متزامنة One-Control-Two
يمكنه تشغيل مشغلين خطيين كهربائيين بشكل متزامن تمامًا. تحكم سلكي عبر مقبض تحكم. تحكم لاسلكي عبر جهاز تحكم عن بعد. وظيفتان fun...
عرض التفاصيل ←