12V 24V SLA08 8000N linear actuator 300mm stroke for dump trailer

1 / 4

مشغل خطي SLA08 8000N

12V 24V SLA08 8000N linear actuator 300mm stroke for dump trailer

12V/24V heavy-duty electric linear actuator with 300mm stroke and up to 8000N (1798 lbs) thrust. Optimized for dump trailer and industrial OEM motion systems. IP65, clevis mounts, optional Hall feedback.

Manufactured and supplied by Elerover — مشغل خطي manufacturer and OEM partner for industrial, medical, furniture and solar motion systems.

المعلمات الرئيسية

Model
SLA08
Working Voltage
12V / 24V DC
Stroke
300mm
Max Load Capacity
8000N / 800 kg / 1798 lbs
Protection Class
IP65
Installation Length
550 mm
Motor Type
Brushed DC
Primary Application
dump trailer
Request OEM Quote واتساب
  • Custom stroke
  • Custom voltage
  • Custom connector
  • OEM / private-label inquiry

نظرة عامة على المنتج

The SLA08 8000N 300mm stroke linear actuator is a heavy-duty 12V/24V industrial electric actuator delivering up to 8000N (1798 lbs) thrust. Retracted installation length is 550 mm. Ideal for dump trailer, lifting platforms, construction machinery, agriculture and OEM automation.

الميزات الرئيسية

  • Heavy-duty industrial electric linear actuator for high-load OEM motion
  • Working voltage: 12V / 24V DC (36V / 48V optional)
  • Max thrust / pull up to 8000N (approx. 1800 lbs / 800 kg)
  • Stroke options from 50mm to 700mm (custom strokes available)
  • Compact installation footprint with parallel motor layout
  • Outer tube Φ63mm; motor housing Φ64mm
  • Front and rear clevis mounts with Φ13mm mounting holes
  • Built-in electronic limit switches (clutch protection optional)
  • IP65 dust-tight and water-jet protection
  • Optional built-in Hall signal for position feedback
  • Two-wire DC control — reverse polarity to change direction

المواصفات الفنية

Model SLA08
Working Voltage 12V / 24V DC
Stroke 300mm
Installation Length 550 mm
Max Load Capacity 8000N / 800 kg / 1798 lbs
Outer Tube Φ63mm
Motor Diameter Φ64mm
Mounting Hole Φ13mm clevis (front & rear)
Protection Class IP65
Motor Type Brushed DC
Built-in Limit Switch Yes
Hall Signal Optional
Primary Application dump trailer

التطبيقات

  • Dump trailer
  • Lifting platforms
  • Construction machinery
  • Agricultural equipment
  • Gate automation
  • Solar tracking systems
  • Material handling

تفاصيل إضافية

SLA08 8000N Linear Actuator

12V 24V SLA08 8000N linear actuator 300mm stroke for dump trailer

This 300mm heavy-duty electric linear actuator delivers up to 8000N (1798 lbs) thrust on 12V or 24V DC. It is engineered for dump trailer and other industrial motion systems that need reliable high-force push / pull with compact installation dimensions.

Model
SLA08
Stroke
300mm
Max Thrust
8000N / 1798 lbs
Voltage
12V / 24V DC
Install Length
550 mm

Product Structure

  • Front connector — clevis eye for load or application mounting
  • Stroke rod — extends and retracts to deliver linear motion
  • Outer tube — Φ63mm industrial housing for the drive screw
  • Gear housing — compact parallel-motor gearbox base
  • Built-in limit switches — stop the actuator at fully extended or retracted position
  • Rear connector — clevis eye for base mounting
  • Brushed DC motor — Φ64mm motor for high-load duty
  • Power cable — connects to the DC power supply

Operation

Connect the actuator leads to a 12V or 24V DC supply. One polarity extends the stroke rod; reversing polarity retracts it. Built-in limit switches cut motor current at the end of each stroke. Optional Hall signal wiring supports position feedback when ordered with that option.

Stroke & Installation Length

With built-in limit switches, retracted center-to-center length L = S + 250mm. With clutch-type protection, L = S + 200mm. This 300mm built-in limit switch model has a retracted length of 550 mm.

Speed vs Load

Different speeds correspond to different maximum thrust and self-locking force. Use the table below to select the right SLA08 gearing for your duty cycle.

Different Speeds and Corresponding Maximum Thrust

No-load Speed Full load Speed Maximum Thrust Self-locking Force
5mm/s3.5mm/s8000 N / 800 kg / 1800 lbs8500 N / 850 kg / 1900 lbs
8mm/s6mm/s7000 N / 700 kg / 1600 lbs7500 N / 750 kg / 1700 lbs
10mm/s7mm/s6000 N / 600 kg / 1300 lbs6500 N / 650 kg / 1500 lbs
12mm/s9mm/s5000 N / 500 kg / 1100 lbs5500 N / 550 kg / 1200 lbs
16mm/s12mm/s4000 N / 400 kg / 880 lbs4500 N / 450 kg / 1000 lbs
20mm/s15mm/s3000 N / 300 kg / 670 lbs3500 N / 350 kg / 790 lbs
28mm/s20mm/s2000 N / 200 kg / 450 lbs2500 N / 250 kg / 560 lbs
50mm/s38mm/s1000 N / 100 kg / 200 lbs1500 N / 150 kg / 340 lbs

Speed & Load Notes:

  • The above data is the maximum load capacity for vertical operation. For hinged loads (for example a cellar door), the force on the actuator is often 2–5× the equipment weight depending on mounting geometry. Contact us if you need help calculating the required thrust.
  • No-load speed is shown above; actual working speed decreases as load increases. Full-load speed is approximately 60–70% of no-load speed.
  • Different speeds correspond to different maximum loads. Select speed according to both the travel time and maximum load you need.
  • Continuous operation at maximum load is not recommended. Running at about half of the maximum load typically improves service life.
  • For strokes greater than 500mm, avoid operating at full stroke under heavy load. If you need 600mm useful stroke under load, we recommend ordering 700–800mm stroke.
  • Maximum pull force is slightly less than maximum thrust.

Need a Custom Configuration?

Contact Elerover for voltage, stroke, speed, Hall feedback, cable length and connector customization for your OEM project. Messages go to [email protected].

منتجات مشابهة

وحدات تحكم متوافقة

واتساب