مشغل خطي SLA-12K 12000N

12V 24V SLA-12K 12000N linear actuator 700mm stroke for heavy duty gate

12V/24V heavy-duty electric linear actuator with 700mm stroke and up to 12000N (2700 lbs) thrust. Optimized for heavy duty gate and industrial OEM motion systems. IP66, clevis mounts, optional Hall feedback, manual override.

Manufactured and supplied by Elerover — مشغل خطي manufacturer and OEM partner for industrial, medical, furniture and solar motion systems.

المعلمات الرئيسية

Model
SLA-12K
Working Voltage
12V / 24V DC
Stroke
700mm
Max Load Capacity
12000N / 1200 kg / 2700 lbs at 6mm/s
Protection Class
IP66
Installation Length
890 mm
Motor Type
Brushed DC
Duty Cycle
10%
  • Custom stroke
  • Custom voltage
  • Custom connector
  • OEM / private-label inquiry

نظرة عامة على المنتج

The SLA-12K 12000N 700mm stroke linear actuator is a heavy-duty 12V/24V industrial electric actuator delivering up to 12000N (2700 lbs) thrust. Retracted installation length is 890 mm. Ideal for heavy duty gate, cellar doors, hatchways, solar tracking, agriculture and OEM automation.

الميزات الرئيسية

  • Heavy-duty industrial electric linear actuator for high-load OEM motion
  • Working voltage: 12V / 24V DC (36V / 48V optional)
  • Max thrust / pull up to 12000N (approx. 2700 lbs / 1200 kg) at 6mm/s
  • Stroke options from 50mm to 700mm (custom strokes available)
  • Metal housing and metal gearbox for harsh environments
  • Stainless steel stroke rod with aluminum alloy outer tube
  • Front and rear clevis mounts with Φ13mm mounting holes
  • Built-in limit switches with optional Hall / potentiometer feedback
  • IP66 dust-tight and water-jet protection
  • Manual override for emergency operation during power loss
  • Two-wire DC control — reverse polarity to change direction

المواصفات الفنية

Model SLA-12K
Working Voltage 12V / 24V DC
Stroke 700mm
Installation Length 890 mm
Max Load Capacity 12000N / 1200 kg / 2700 lbs at 6mm/s
Outer Tube Approx. Φ28.5mm
Mounting Hole Φ13mm clevis (front & rear)
Protection Class IP66
Motor Type Brushed DC
Built-in Limit Switch Yes
Hall Signal Optional
Manual Override Yes
Duty Cycle 10%
Primary Application heavy duty gate

التطبيقات

  • Heavy duty gate
  • Cellar doors and trapdoors
  • Solar tracking systems
  • Agricultural machinery
  • Elevator platforms
  • Marine hatches
  • Construction equipment

تفاصيل إضافية

SLA-12K 12000N Linear Actuator

12V 24V SLA-12K 12000N linear actuator 700mm stroke for heavy duty gate

This 700mm heavy-duty electric linear actuator delivers up to 12000N (2700 lbs) thrust on 12V or 24V DC. It is engineered for heavy duty gate and other industrial motion systems that need reliable high-force push / pull with IP66 protection.

Model
SLA-12K
Stroke
700mm
Max Thrust
12000N / 2700 lbs
Voltage
12V / 24V DC
Install Length
890 mm

Product Structure

  • Front connector — clevis eye for load or application mounting
  • Stroke rod — stainless steel rod that extends and retracts
  • Outer tube — aluminum alloy housing for the drive screw
  • Gear housing — metal gearbox base for high-load duty
  • Built-in limit switches — stop the actuator at fully extended or retracted position
  • Rear connector — clevis eye for base mounting (orientation adjustable)
  • Brushed DC motor — high-power motor for heavy-duty thrust
  • Power cable — connects to the DC power supply

Operation

Connect the actuator leads to a 12V or 24V DC supply. One polarity extends the stroke rod; reversing polarity retracts it. Built-in limit switches cut motor current at the end of each stroke. Optional Hall or potentiometer wiring supports position feedback when ordered with that option.

Stroke & Installation Length

Retracted center-to-center length L = S + 190mm. This 700mm model has a retracted length of 890 mm and an extended length of 1590 mm.

External Dimensions

  • Housing length (gear/motor section): approx. 229.5mm
  • Overall width: 76mm
  • Overall height: 150mm
  • Mounting hole diameter: Φ13mm (front & rear)
  • Outer tube diameter: approx. Φ28.5mm
  • Rear mount orientation can be set to 0° / 30° / 60° / 90°

Speed vs Load

Different speeds correspond to different maximum thrust and self-locking force. Use the table below to select the right SLA-12K gearing for your duty cycle.

Different Speeds and Corresponding Maximum Thrust

No-load Speed Full load Speed Maximum Thrust Self-locking Force
6mm/s5mm/s12000 N / 1200 kg / 2700 lbs15000 N / 1500 kg / 3300 lbs
8mm/s6mm/s11000 N / 1100 kg / 2400 lbs12000 N / 1200 kg / 2700 lbs
12mm/s9mm/s10000 N / 1000 kg / 2200 lbs12000 N / 1200 kg / 2700 lbs
16mm/s10mm/s7000 N / 700 kg / 1500 lbs8000 N / 800 kg / 1800 lbs
20mm/s11mm/s6500 N / 650 kg / 1400 lbs8000 N / 800 kg / 1800 lbs
25mm/s14mm/s5000 N / 500 kg / 1100 lbs6000 N / 600 kg / 1300 lbs
38mm/s24mm/s3200 N / 320 kg / 700 lbs4000 N / 400 kg / 900 lbs
60mm/s30mm/s2000 N / 200 kg / 440 lbs3000 N / 300 kg / 660 lbs

Speed & Load Notes:

  • The above data is the maximum load capacity for vertical operation. For hinged loads (for example a cellar door), the force on the actuator is often 2–5× the equipment weight depending on mounting geometry. Contact us if you need help calculating the required thrust.
  • No-load speed is shown above; actual working speed decreases as load increases. Full-load speed is approximately 60–70% of no-load speed.
  • Different speeds correspond to different maximum loads. Select speed according to both the travel time and maximum load you need.
  • Continuous operation at maximum load is not recommended. Running at about half of the maximum load typically improves service life.
  • For strokes greater than 500mm, avoid operating at full stroke under heavy load. If you need 600mm useful stroke under load, we recommend ordering 700–800mm stroke.
  • Maximum pull force is slightly less than maximum thrust.

Need a Custom Configuration?

Contact Elerover for voltage, stroke, speed, Hall feedback, cable length and connector customization for your OEM project. Messages go to [email protected].

منتجات مشابهة

وحدات تحكم متوافقة

واتساب